Sprint Cover - Covers - SELVOLINE OFFICIAL WEBSITE

METALLIC CARPENTRY SINCE 1977

DESIGN, PRODUCTION AND SALES OF METAL STRUCTURES

PLATFORMS  –  STAGES  –  COVERS  –  TRIBUNES  –  TRUSSES  –  STANDS  –  BALLASTS  –  DEHORS  –  GAZEBOS  –  LARGE - SIZED GAZEBOS  –  SHELTERS  –  SPECIAL STRUCTURES  –  ROTATING PLATFORMS  –  URBAN FURNITURE  –  ELECTORAL BILLBOARDS  –  POLE DANCE  –  COMPANY PRESENTATION
SPRINT cover
DESCRIPTION
Fully-independent, self-installing structure. Innovative for its ease of use and assembly, quality of materials, reduced size and weight.
Pillars in natural anticorodal aluminium alloy (extrusion: Selvoline® design). Tarpaulin supporting tubes in natural anticorodal aluminium alloy (extrusion: Selvoline® design). Perimeter and central (if any) beams coated with special anti-corrosion treatments. Fixing system: interlocking and/or bayonet.
Pillars, fixed to front and rear beams, can be used as portals.
Sizes: 6.20 x 8.50 m - 8.20 x 10.50 m - 8.20 x 12.50 m - 10.20 x 10.50 m - 10.20 x 12.50 m
SPECIFICATION
Metal load-bearing structure made of:

  • 4 steel BASE SUPPORTS with vertical holes for aluminium pillar adjustment on uneven or sloping ground. The supports are fitted with stabilizing feet.
  • MANUAL HOIST (capacity: 900 kg) fixed on each base with pins.
  • 4 LOAD-BEARING PILLARS, made of natural anticorodal aluminium alloy, front height: 5.50 m, rear height: 5.00 m. This difference in height creates a sloping roof for rainwater draining. A pulley support is fixed on the top of each pillar for the sliding of a LIFTING ROPE.
  • 4 SLIDING steel TROLLEYS linked to the hoist with a certified anti-twisting steel ROPE, whose function is to lift or lower the ROOF. The pins inserted into each pillar make it possible to position the trolley at a minimum height level from the ground, which is useful when assembling the roof components, and at a preset maximum height (for shows performed on the stage below).
  • Triangular-section front and rear beams and flat side beams, made in high tensile steel to bear the weight of the lighting system. The beams are anchored to 4 lifting trolleys with a bayonet locking system and pins.
  • TARPAULIN SUPPORTING TUBES in anticorodal aluminium alloy. The tubes are laid on the front and rear beams and locked with pins.
  • Class 2 flameproof PVC TARPAULIN fixed to the structure with a rope passing through eyelets. For short events, tarpaulins can be fixed with elastic joints.
  • High tensile steel and anticorodal aluminium alloy ensure the highest resistance and lightness. Easy and quick ASSEMBLY and DISASSEMBLY.
  • Protective treatment: sandblasting + metalizing + painting (colour: grey).
  • Documents: technical report, declaration of conformity, declaration of performance (DoP) with CE label and use and maintenance manual.
ACCESSORIES & OPTIONS
  • Ballasts and anchoring devices (see dedicated page), to be calculated according to wind speed, structure use and position.
  • Class 2 flameproof PVC tarpaulins for stage wings and backdrops (fitted with tracks and accessories).
  • Electric motors equipped with control unit. Attention: electric motors are subject to current regulations as if they were bridge cranes and a yearly check is required.