Triangular T20S Triangular truss in high quality steel, side 20 cm, V-shaped, standard load
Exhibition stands, temporary shops, stages, public events and architectural sites. Thanks to their modularity and versatility, our trussing systems can help you create the most suitable metal structure for your present and future needs.
The mechanical properties of steel as well as its high tensile strength and sturdiness are the reasons we have chosen it to manufacture our trusses. It is the most suitable material in terms of durability, adaptability, elasticity, resistance to wear and galvanic corrosion - its thermal expansion is half that of aluminium. Its greater load capacity enables us to produce trusses with a narrower section than those in aluminium. As a result, for an equivalent length, the weight will be practically the same.
STANDARD: lightweight solutions for low load capacity
Side: 20 cm
Chords: Ø 14 mm
Diagonals (cold-drawn rods): Ø 4,8 mm
Insertable tube max: Ø 85 mm - □ 70 x 70 mm
M8 nuts and bolts in 8.8 steel included
Dimensions and weight
50 cm - 1,8 kg
100 cm - 2,8 kg
150 cm - 3,8 kg
200 cm - 4,8 kg
225 cm - 5,3 kg
250 cm - 5,8 kg
Finishes
Besides the mechanical resistance of steel, surface coating treatments can contribute to build long-lasting structures. Depending on the position and use of the structure, you can choose from electrogalvanization, cataphoresis and epoxy powder painting for indoor structures and hotdip galvanization, electrogalvanization and cataphoresis in addition to polyester painting for outdoor structures
Legislative reference
Italian Ministerial Decree of 17 January 2018 (NTC 2018).
Technical documentation enclosed
Assembly diagram, technical report, declaration of performance (DoP), CE label and use and maintenance manual.
- 90° Corner cod. T20S.90P (ex cod. 10.01)
- 90° Corner with plate cod.T20S.90PC (ex cod. 10.01/C)
- 90° Corner apex out cod. T20S.90VE (ex cod.10.01/B)
- 90° Corner apex in cod. T20S.VI (ex cod.10.01/A)
- 135° Corner cod. T20S.135P (ex cod. 10.01/F)
- 135° Corner apex out cod. T20S.135VE (ex cod. 10.01/G)
- 135° Corner apex in cod. T20S.135VI (ex cod. 10.01/H)
- 3-Way T piece cod. T20S.3VP (ex cod. 10.02)
- 3-Way T piece with plate cod. T20S.3VPC (ex cod. 10.02/A)
- 3-Way T piece with side junction cod. T20S.3VGL (ex cod. 10.02/B)
- 3.Way T piece with apex cod. T20S.3VGV (ex cod. 10.02/C)
- Cross cod. T20S.4VX(ex cod. 10.03)
- Truss with plate L=50cm cod. T20S.050PC (ex cod. 10.50/A)
- 1-eye hanging plate (up) cod. T20S.S1PA (ex cod. 10.08)
- 1-eye hanging plate (down) cod. T20S.S1PB (ex cod. 10.09)
- 3-eye hanging plate cod. T20S.S3P (ex cod. 10.07)
- Ceiling bracket cod. T20S.PSS (PIATTO2)
- Reinforcement plate cod. T20S.PRT (ex cod. GA25)
- Base plate 31x31 cm cod. BL.31 (ex cod. 20.03)
- Base plate 41x41 cm cod. BL41 (ex cod. 20.04)
- Base plate 70x30 cm (h 6 mm) cod. BL.70H6 (ex cod.20.14)
- Base plate 70x30 cm (h 30 mm) cod. BL.70H30 (ex cod. 20.15)
- Wall plate cod. T20S.PM (ex cod. PIASTRA2)
- Omega-shaped bracket for wall fixing cod. T20S.OFM (ex cod. OMEGA2)
- Foot cod. T20S.PA (ex cod. GA.07)
Exhibition stands, temporary shops, stages, public events and architectural sites.
Thanks to their modularity and versatility, our trussing systems can help you create the most suitable metal structure for your present and future needs.