Square Q30S Square truss in high quality steel, side 30 cm, Z-shaped, standard load
Exhibition stands, temporary shops, stages, public events and architectural sites. Thanks to their modularity and versatility, our trussing systems can help you create the most suitable metal structure for your present and future needs.
The mechanical properties of steel as well as its high tensile strength and sturdiness are the reasons we have chosen it to manufacture our trusses. It is the most suitable material in terms of durability, adaptability, elasticity, resistance to wear and galvanic corrosion - its thermal expansion is half that of aluminium. Its greater load capacity enables us to produce trusses with a narrower section than those in aluminium. As a result, for an equivalent length, the weight will be practically the same.
STANDARD: lightweight solutions for low load capacity
Side: 30 cm
Chords: Ø 25 mm
Diagonals (cold-drawn rods): Ø 9,8 mm
Insertable tube max: Ø 235 mm - □ 190 x 190 mm
M12 nuts and bolts in 8.8 steel included
Dimensions and weight
100 cm - 13,0 kg
140 cm - 16,5 kg
150 cm - 17,2 kg
200 cm - 21,6 kg
250 cm - 25,9 kg
250 cm with base - 49,0 kg
300 cm – 71,0 kg
Finishes
Besides the mechanical resistance of steel, surface coating treatments can contribute to build long-lasting structures. Depending on the position and use of the structure, you can choose from electrogalvanization, cataphoresis and epoxy powder painting for indoor structures and hotdip galvanization, electrogalvanization and cataphoresis in addition to polyester painting for outdoor structures
Legislative reference
Italian Ministerial Decree of 17 January 2018 (NTC 2018).
Technical documentation enclosed
Assembly diagram, technical report, declaration of performance (DoP), CE label and use and maintenance manual.
- Cube cod. Q30S.CB
- 90° corner cod. Q30S.90
- 120° trapezoid corner for hex structures cod. Q30S.120T
- 120° corner for hexstructures cod. Q30S.120E
- 135° corner for octagonal structures cod. Q30S.135O
- 1-eye hanging plate cod. Q30S.S1P
- 2-eye hanging plate (inclined fixing) cod. Q30S.S2P
- 3-eye hanging plate cod.Q30S.S3P
- Ceiling bracket cod. Q30S.PSS
- Wall plate cod. Q30S.PM
- Wall plate, longitudinal installation cod. Q30S.PML
- Omega bracket for wall fixing (plugs excluded) cod. Q30S.OFM
- Reinforcement plate cod. Q30S.PRT
- Lateral reinforcement plate for heads cod. Q30S.PRL
- Internal reinforcement plate for a cube cod. Q30S.PRI
- External reinfor cement plate for a cube cod. Q30S.PRE
- Pair of plates for truss junction cod. Q30S.CPG
- Double beam plate cod. Q30S.PTD
- Bracket kit + ø25 mm pipe mounting plate cod. CAT.25K
- ø25 mm pipe anchor bracket cod. CAT.25
- Reinforced sheet metal base 41 x 41 cm cod. BL.41R
- Reinforced sheet metal base 51 x 51 cm cod. BL.51R
- Base plate 100x50 cm (h 40 mm) cod. BL.100H40
- Spacer plate for lag screws cod. Q30S.DPTF
- Support feet cod. Q30S.PA
Exhibition stands, temporary shops, stages, public events and architectural sites.
Thanks to their modularity and versatility, our trussing systems can help you create the most suitable metal structure for your present and future needs.
Not sure which solution is right for you?
Our in-house technical office can assist you in making the right choice!