Square Q25H Square truss in high quality steel, side 25 cm, Z-shaped, high load
Exhibition stands, temporary shops, stages, public events and architectural sites. Thanks to their modularity and versatility, our trussing systems can help you create the most suitable metal structure for your present and future needs.
The mechanical properties of steel as well as its high tensile strength and sturdiness are the reasons we have chosen it to manufacture our trusses. It is the most suitable material in terms of durability, adaptability, elasticity, resistance to wear and galvanic corrosion - its thermal expansion is half that of aluminium. Its greater load capacity enables us to produce trusses with a narrower section than those in aluminium. As a result, for an equivalent length, the weight will be practically the same.
HI-LOAD: solutions for high load capacity and ultimate resistance
Side: 25 cm
Chords: Ø 18 mm
Diagonals (cold-drawn rods): Ø 6,8 mm
Insertable tube max: Ø 185 mm - □ 155 x 155 mm
M8 nuts and bolts in 8.8 steel included
Dimensions and weight
50 cm - 4,5 kg
100 cm - 7,3 kg
150 cm - 10,1 kg
200 cm - 12,9 kg
225 cm - 14,3 kg
250 cm - 15,7 kg
250 cm with base - 28,2 kg
275 cm - 17,1 kg
300 cm – 18,5 kg
Finishes
Besides the mechanical resistance of steel, surface coating treatments can contribute to build long-lasting structures. Depending on the position and use of the structure, you can choose from electrogalvanization, cataphoresis and epoxy powder painting for indoor structures and hotdip galvanization, electrogalvanization and cataphoresis in addition to polyester painting for outdoor structures
Legislative reference
Italian Ministerial Decree of 17 January 2018 (NTC 2018).
Technical documentation enclosed
Assembly diagram, technical report, declaration of performance (DoP), CE label and use and maintenance manual.
- Cube cod. Q25H.CB
- 90° curve cod. Q25H.90
- 120° trapezoid for hexagonal ring cod. Q25H.120T
- 120° curve for hexagonal ring cod. Q25H.120E
- 135° curve for octagonal ring cod. Q25H.135O
- Ceiling suspension plate cod. Q25H.PSS
- 1-point suspension head cod. Q25H.S1P
- 2-point suspension head with inclined anchor cod. Q25H.S2P
- 3-point suspension head cod. Q25H.S3P
- Reinforcement plate for heads cod. Q25H.PRT
- Lateral reinforcement plate for heads cod. Q25H.PRL
- Pair of plates for truss junction cod. Q25H.CPG
- Sheet metal base 31 x 31 cm cod. BL.31
- Sheet metal base 41 x 41 cm (perimeter holes for anchoring on request) cod. BL.41
- Reinforced sheet metal base 41 x 41 cm cod. BL.41R
- Sheet metal base 70 x 30 cm (H 6mm) cod. BL.70H6
- Pressed sheet metal base 70 x 30 cm (H 30mm) cod. BL.70H30
- Wall plate cod. Q25H.PM
- Omega bracket for wall fixing cod. Q25H.OFM
- Double beam plate cod. Q25H.PTD
- Support foot cod. Q25H.PA
- Anti-scratch clamp for 18mm diameter tube cod. FA.18
- Bracket for suspended loads cod. Q25H.SCS
- Load redistribution system cod. Q25H.SRC
- Antenna holder plate for column cod. Q25H.PPA
- Cable tension plate for column cod. Q25H.PTC
- Wall fixing plate for column cod. Q25H.PMC
Exhibition stands, temporary shops, stages, public events and architectural sites.
Thanks to their modularity and versatility, our trussing systems can help you create the most suitable metal structure for your present and future needs.