Triangular Truss 40 Cm (hi-load) - Trusses - SELVOLINE OFFICIAL WEBSITE

METALLIC CARPENTRY SINCE 1977

DESIGN, PRODUCTION AND SALES OF METAL STRUCTURES

PLATFORMS  –  STAGES  –  COVERS  –  TRIBUNES  –  TRUSSES  –  STANDS  –  BALLASTS  –  DEHORS  –  GAZEBOS  –  LARGE - SIZED GAZEBOS  –  SHELTERS  –  SPECIAL STRUCTURES  –  ROTATING PLATFORMS  –  URBAN FURNITURE  –  ELECTORAL BILLBOARDS  –  POLE DANCE  –  COMPANY PRESENTATION
TRIANGULAR TRUSS 40 cm (Hi-Load)
DESCRIPTION

Exhibition stands, temporary shops, stages, public events and architectural sites. Thanks to their modularity and versatility, our trussing systems can help you create the most suitable metal structure for your present and future needs.

 

The mechanical properties of steel as well as its high tensile strength and sturdiness are the reasons we have chosen it to manufacture our trusses. It is the most suitable material in terms of durability, adaptability, elasticity, resistance to wear and galvanic corrosion - its thermal expansion is half that of aluminium. Its greater load capacity enables us to produce trusses with a narrower section than those in aluminium. As a result, for an equivalent length, the weight will be practically the same.

SPECIFICATION
  • HI-LOAD: solutions for high load capacity and ultimate resistance
  • Side: 40 cm
  • Upper chords: Ø 60,3 mm;
  • Lower chords: Ø 42,4 mm;
  • Diagonals made up of tubes: Ø 25 mm;
  • Insertable tube max: Ø 180 mm - □ 150 x 150 mm;
  • M12 nuts and bolts in 8.8 steel included

 

  • Dimensions and weight:
    200 cm - 42,2 kg
    250 cm - 50,4 kg
    300 cm - 58,6 kg

 

  • Finishes
    Besides the mechanical resistance of steel, surface coating treatments can contribute to build long-lasting structures. Depending on the position and use of the structure, you can choose from electrogalvanization, cataphoresis and epoxy powder painting for indoor structures and hotdip galvanization, electrogalvanization and cataphoresis in addition to polyester painting for outdoor structures

 

  • Legislative reference: Italian Ministerial Decree of 17 January 2018 (NTC 2018).

 

  • Technical documentation enclosed: assembly diagram, technical report, declaration of performance (DoP), CE label and use and maintenance manual.
ACCESSORIES & OPTIONS
  • 1-eye hanging plate (up) cod. T40H.S1PA  (ex. cod. 52.04)
  • 1-eye hanging plate (down) cod. T40H.S1PB (ex. cod. 52.05)
  • 3-eye hanging plate cod. T40H.S3P (ex. cod. 52.03)
  • Side reinforcement plate cod. T40H.PRL (ex. cod. 28.09)
  • Wall plate ex. cod. T40H.PM
  • Omega-shaped bracket for wall fixing cod. T40H.OFM (ex. cod. OMEGA5)