IBIS shelter
DESCRIPTION
The Ibis shelter can be built up of one or more modules.
SPECIFICATION
Modular structure in high quality hot-dip
galvanized steel, depth: 5 m, with base
plates and emergency pillar for each loadbearing frame. The shelter can be built up of
one or more modules.
Designed in compliance with EN 13782.
Available Roofing:
- shading net 94% high tenacity, UV stabilized, hailproof
- class 2 flameproof PVC tarpaulin
EXTRA INFORMATION
The IBIS shelter is also available with a depth of 3.8 m or 2.6 m and has the same configurations as in the 5-m
deep shelter.
Ibis and Primavera shelters with a width of 2.5 m are designed for permanent installations in compliance to
NTC 2018 (wind, snow and seismic loads).
The location and the type of ground are key to evaluate the suitability of the installation.
Some solutions shown in the Shelter Catalogue should be considered as suggestions.
A qualified technician must evaluate the characteristics of the installation site and its load values so as to
choose the optimal solution.
Permits vary according to the type of structure as well as the region and municipality of the installation site.
Shade netting, PVC tarpaulins and panels are available as roofing materials.
No building authorizations are required for shelters with shade netting, unless otherwise stated by local
authorities.
Technical specifications, examples of ground fixing and ballasting systems are available on request.
Please, contact a local technician for advice about all permits and authorizations required for installation
ACCESSORIES & OPTIONS
- polyester painting, in addition to heat galvanization
Similar Products
Downloadable Documents
